Every year, thousands of American children end up in emergency rooms after inserting objects — hairpins, keys, paper clips — into outlets. Tamper-resistant receptacles are the NEC’s answer: outlets with built-in shutters that block foreign objects but open normally for a real plug. Required in US homes since the 2008 NEC and expanded several times since, they are now among the most widely installed safety devices in residential wiring.
How Tamper-Resistant Receptacles Work
Behind each slot of a tamper-resistant (TR) receptacle sits a spring-loaded plastic shutter. The shutters only retract when both plug blades press them simultaneously with roughly equal force — exactly what a proper plug does. A single object (paper clip, key, finger) in one slot leaves the shutter shut; there is no path to the energized contacts. The mechanism is entirely mechanical and is evaluated under UL 498. If you are comparing device types, see our socket guide and receptacle overview.
How to Identify a Tamper-Resistant Outlet
Two signs give them away. First, the slots: instead of metal contacts, you will see plastic shutters blocking the openings. Second, listed TR receptacles are marked “TR” on the face or mounting yoke — inspectors check for this at final inspection. “Tamper-proof” is jobsite slang; the Code term is tamper-resistant, because no device defeats every determined attempt.
Where NEC 406.12 Requires Them
NEC 406.12 requires all 15- and 20-ampere, 125- and 250-volt, nonlocking-type receptacles in these locations to be listed tamper-resistant (2023 NEC):
| # | Location |
|---|---|
| 1 | All dwelling units, boathouses, mobile and manufactured homes — including attached and detached garages, accessory buildings, and common areas |
| 2 | Guest rooms and guest suites of hotels and motels, and their common areas |
| 3 | Child care facilities |
| 4 | Preschools and education facilities |
| 5 | Publicly accessible business offices, lobbies, and waiting spaces in clinics, medical and dental offices, and outpatient facilities; patient-sleeping areas of nursing homes and limited-care facilities |
| 6 | Places of awaiting transportation, gymnasiums, skating rinks, fitness centers, and auditoriums |
| 7 | Dormitory units |
| 8 | Residential care / assisted living facilities, social and substance-abuse rehabilitation facilities, and group homes |
| 9 | Foster care facilities, nursing homes, and psychiatric hospitals |
| 10 | Areas of agricultural buildings accessible to the general public and common areas |
The list has grown with every Code cycle since TR receptacles were first required in dwellings in the 2008 NEC — the common thread is places where children may be present.
The Exceptions: Where TR Is Not Required
NEC 406.12 provides four exceptions:
- Receptacles located more than 5.5 feet (1.7 m) above the floor — out of a small child’s reach.
- Receptacles that are part of a luminaire or appliance.
- A single or duplex receptacle that is not readily accessible and supplies cord-and-plug-connected appliances that are not easily moved — for example, the receptacle behind a refrigerator, installed within the space the appliance occupies.
- Nongrounding receptacles used for replacements as permitted in 406.4(D)(2)(a) — the old two-slot outlets in ungrounded boxes.
TR, GFCI, and AFCI: Different Jobs
Homeowners often confuse these, but they guard against different hazards and are frequently required together:
- Tamper-resistant (TR) — shutters that block foreign objects. Required by 406.12 based on location and occupancy.
- GFCI — trips on ground faults to prevent electrocution. Required by 210.8 in bathrooms, kitchens, garages, outdoors, basements, laundry areas, and near sinks.
- AFCI — trips on arc faults to prevent fires. Required by 210.12 on most dwelling-unit living-area circuits.
A bathroom receptacle in a home, for example, must be both tamper-resistant and GFCI-protected — sold as a single combination device or achieved with a TR receptacle on a GFCI breaker. Review the broader safety picture in our electrical safety rules and plug types guide.
Replacements and Existing Homes
NEC 406.4(D)(5): when a receptacle in a location covered by 406.12 is replaced, the replacement must be tamper-resistant.
NEC 406.4(D)(5) requires that when a receptacle in a location covered by 406.12 is replaced, the replacement must be tamper-resistant. You do not have to proactively swap every outlet in an older home — but the moment you replace one in a covered location, it must be a TR device. Any required GFCI or AFCI protection must also be added at the same time.
Living With TR Outlets: Practical Tips
New TR receptacles can feel stiff — the shutters need both blades pressing evenly, so push the plug straight in with firm, even pressure instead of rocking it. Bent plug blades hit one shutter harder than the other. Never defeat the shutters — a “modified” TR receptacle is a code violation.
Are tamper-resistant outlets required by code?
Yes. NEC 406.12 has required listed tamper-resistant receptacles in dwelling units since the 2008 NEC, and the 2023 NEC expanded the requirement to ten location categories including hotels, schools, child care, dormitories, and assisted living.
How do I know if my outlet is tamper-resistant?
Look for shutters blocking the slots and the letters “TR” on the face or yoke — inspectors check for this marking at final inspection.
Can I replace a regular outlet with a tamper-resistant one myself?
Physically it is a like-for-like device swap, but NEC 406.4(D) requires the replacement to be TR in covered locations and to add any required GFCI/AFCI protection. Turn off the breaker, verify dead, and if your wiring is old, ungrounded, or aluminum, have an electrician do it.
Do TR outlets also protect against shock from a proper plug?
No — that is GFCI’s job. TR shutters only block foreign objects from reaching the contacts. In wet or outdoor locations you need both protections, which is why TR/GFCI combination devices exist.
Conclusion
Tamper-resistant receptacles are a simple, mechanical defense against childhood electrical injuries — required in US homes since 2008, expanded to ten occupancy categories in 2023. Identify them by the shutters and the “TR” marking, respect the four exceptions, and remember that TR, GFCI, and AFCI each do a different job. Confirm your locality’s NEC edition and consult a licensed electrician for anything beyond a straightforward replacement.

